Configuring Cfm Mep; Configuring An Erp Instance - Cisco ASR 9000 Series Configuration Manuallines

Configuring CFM MEP

• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
Configuring CFM MEP
For more information about Ethernet Connectivity Fault Management (CFM), refer to the Configuring Ethernet
OAM on the Cisco ASR 9000 Series Router module in the Cisco ASR 9000 Series Aggregation Services Router
Interface and Hardware Component Configuration Guide.

Configuring an ERP Instance

Perform this task to configure an ERP instance.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. profile profile-name
13. rpl { port0 | port1 } { owner | neighbor | next-neighbor }
14. inclusion-list vlan-ids vlan-id
15. aps-channel
16. level number
17.
18. port1 { interface type interface-path-id | bridge-domain bridge-domain-name | xconnect
19. Use the commit or end command.
DETAILED STEPS
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
280
configure
l2vpn
bridge group bridge-group-name
bridge-domain domain-name
interface type port0-interface-path-id.subinterface
interface type port1-interface-path-id.subinterface
bridge-domain domain-name
interface type interface-path-id.subinterface
ethernet ring g8032 ring-name
instance number
description string
port0 interface type path-id
xconnect-name | none }
Implementing Multipoint Layer 2 Services