Changing The Administrator Username And Password - Cisco RV160W Quick Start Manual

Launch a web browser, such as Microsoft Internet Explorer or
S 3
TEP
Mozilla Firefox.
In the address bar, enter the default IP address of the device,
S 4
TEP
https://192.168.1.1. A site security certificate message is
displayed. The Cisco RV160W uses a self-signed security
certificate. This message appears because the device is not
known to your computer.
Enter the default user name: cisco and password: cisco in the User
S 5
TEP
Name and Password fields.
Click Login.
S 6
TEP
Follow the Setup Wizard instructions to finish the router installation.
S 7
TEP
We strongly recommend that you use the Setup Wizard for the first
installation.The Setup Wizard turns on the Wi-Fi radio, which allows
you to connect wirelessly. For more advanced configurations, see
the Administration Guide. A link to the Administration Guide is
found in
Congratulations, you can now start using your router.

Changing the Administrator Username and Password

To change the Administrator username and password on the device:
From the Getting Started page, select Change Administrator
S 1
TEP
Password or select System Configuration > User Accounts from
the navigation bar.
Check a username from the Local User Membership list and click
S 2
TEP
Edit.
Enter the Username.
S 3
TEP
Enter the old Password.
S 4
TEP
Enter the new Password.
S 5
TEP
Confirm the new Password.
S 6
TEP
Select the group (admin, guest) from the drop-down list in the
S 7
TEP
Password Strength Meter.
Click Save.
S 8
TEP
8
Where to Go from Here.
Cisco RV160W Router Quick Start Guide