Precautions For Positioning Originals On The Original Glass - Konica Minolta bizhub C200 User Manual

Copy paper/originals
* There are five Foolscap sizes: 220 × 330 mm w, 8-1/2 × 13 w, 8-1/4 × 13 w, 8-1/8 × 13-1/4 w and 8 × 13 w. Any
one of these sizes can be selected. For details, contact your service representative.
6.3.4

Precautions for positioning originals on the original glass

Observe the following precautions when placing the original on the original glass.
- If an original of non-standard paper size is loaded, the "Auto Paper" setting and "Auto" Zoom setting
cannot be used since the original size cannot be detected automatically. If an original of a non-standard
paper size is loaded, select the paper tray and zoom ratio.
- If highly translucent or transparent originals, such as OHP transparencies or diazo photosensitive
paper, are loaded, the original size cannot be detected automatically. Place a blank sheet of paper of
the same size over the original.
- Do not place objects exceeding 2 kg on the original glass, otherwise the original glass may be
damaged.
- Do not press down extremely hard on a book spread on the original glass, otherwise the original glass
may be damaged.
C200
6
6-19