Positioning The Original; Positioning Originals Into The Adf - Konica Minolta BIZHUB PRO C6500E User Manual

Before making copies
5.3

Positioning the original

Use the ADF or original glass to scan the original.
5.3.1

Positioning originals into the ADF

The ADF (Automatic Document Feeder) automatically feeds up to 100
originals directly to the original glass area, starting with the top sheet. The
ADF should only be used for unstapled, smooth, flat originals.
!
Detail
Be sure not to use unsuitable ADF originals. For details of the original
available in the ADF, see page 3-14.
Positioning the original in normal mode
0 Before placing originals in the tray, be sure the ADF is closed fully. Once
closed, do not open the document feeder, otherwise the selected copy
conditions may be altered automatically.
0 Do not load more than 100 sheets of the original or over the limit line
indicated on the paper guides; otherwise the original may be misfed or
damaged, or machine trouble may be caused.
0 Copy result may not be satisfactory if the original should not be
positioned correctly, especially when using duplex mode, Staple, Half
Fold, or Booklet Pagination. See page 6-3 for details.
1
Arrange the original in order.
2
Position the original FACE UP (with
page one UP) in the ADF.
– The direction of the original
should conform to the original
direction icon displayed on the
Copy screen.
Up to 100 sheets of the original
can be set at a time.
bizhub PRO C6500 / bizhub PRO C6500e
5
5-15