Configure Wan Settings; Wan And Isp Connection Settings - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

Chapter 5 Quick Setup

5.2.3 Configure WAN Settings

Use this screen to select whether the interface should use a fixed or dynamic IP address.

Figure 48 WAN Interface Setup: Step 2

• WAN Interface: This is the interface you are configuring for Internet access.

• Zone: This is the security zone to which this interface and Internet connection belong.

• IP Address Assignment: Select Auto If your ISP did not assign you a fixed IP address.

Select Static If the ISP assigned a fixed IP address.

Use this screen to configure the ISP and WAN interface settings. This screen is read-only if you set

the IP Address Assignment to Static.

ISG50 User's Guide