The Http Redirect Screen - ZyXEL Communications UAG2100 User Manual

A client connects to a web proxy server each time he/she wants to access the Internet. The web
proxy provides caching service to allow quick access and reduce network usage. The proxy checks
its local cache for the requested web resource first. If it is not found, the proxy gets it from the
specified server and forwards the response to the client.
HTTP Redirect, Firewall and Policy Route
With HTTP redirect, the relevant packet flow for HTTP traffic is:
Firewall
1
HTTP Redirect
2
Policy Route
3
Even if you set a policy route to the same incoming interface and service as a HTTP redirect rule,
the UAG checks the HTTP redirect rules first and forwards HTTP traffic to a proxy server if matched.
You need to make sure there is no firewall rule(s) blocking the HTTP requests from the client to the
proxy server.
You also need to manually configure a policy route to forward the HTTP traffic from the proxy server
to the Internet. To make the example in
following settings.
For HTTP traffic between lan1 and lan2:
• a from LAN1 to LAN2 firewall rule to allow HTTP requests from lan1 to lan2. Responses to this
request are allowed automatically.
• a HTTP redirect rule to forward HTTP traffic from lan1 to proxy server A.
For HTTP traffic between lan2 and wan1:
• a from LAN2 to WAN firewall rule (default) to allow HTTP requests from lan2 to wan1.
Responses to these requests are allowed automatically.
• a policy route to forward HTTP traffic from proxy server A to the Internet.

17.2 The HTTP Redirect Screen

To configure redirection of a HTTP request to a proxy server, click Configuration > Network >
HTTP Redirect. This screen displays the summary of the HTTP redirect rules.
Note: You can configure up to one HTTP redirect rule for each (incoming) interface.
Chapter 17 HTTP Redirect
Figure 109 on page 185
UAG2100 User's Guide
186
work, make sure you have the