The Http Redirect Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

• a application patrol rule to allow HTTP traffic between ge4 and ge2.

• a policy route to forward HTTP traffic from proxy server A to the Internet.

Finding Out More

Section 6.5.11 on page 110

20.2 The HTTP Redirect Screen

To configure redirection of a HTTP request to a proxy server, click Configuration

> Network > HTTP Redirect. This screen displays the summary of the HTTP

redirect rules.

Note: You can configure up to one HTTP redirect rule for each (incoming) interface.

Figure 299 Configuration > Network > HTTP Redirect

The following table describes the labels in this screen.

Table 101 Configuration > Network > HTTP Redirect

Proxy Server

ZyWALL USG 2000 User's Guide

for related information on these screens.

Click this to create a new entry.

Double-click an entry or select it and click Edit to open a screen where

you can modify the entry's settings.

To remove an entry, select it and click Remove. The ZyWALL confirms

you want to remove it before doing so.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

This field is a sequential value, and it is not associated with a specific

This icon is lit when the entry is active and dimmed when the entry is

This is the descriptive name of a rule.

This is the interface on which the request must be received.

This is the IP address of the proxy server.

Chapter 20 HTTP Redirect