Policy Route Edit Screen - ZyXEL Communications UAG4100 User Manual

Table 72 Configuration > Network > Routing > Policy Route (continued)
LABEL
DSCP Marking
SNAT
Apply
Reset

12.2.1 Policy Route Edit Screen

Click Configuration > Network > Routing to open the Policy Route screen. Then click the Add
or Edit icon in the Configuration section. The Add Policy Route or Policy Route Edit screen
opens. Use this screen to configure or edit a policy route.
Chapter 12 Policy and Static Routes
DESCRIPTION
This is how the UAG handles the DSCP value of the outgoing packets that match this route.
If this field displays a DSCP value, the UAG applies that DSCP value to the route's outgoing
packets.
preserve means the UAG does not modify the DSCP value of the route's outgoing packets.
default means the UAG sets the DSCP value of the route's outgoing packets to 0.
The "af" choices stand for Assured Forwarding. The number following the "af" identifies one
of four classes and one of three drop preferences. See
DiffServ on page 169 for more details.
This is the source IP address that the route uses.
It displays none if the UAG does not perform NAT for this route.
Click Apply to save your changes back to the UAG.
Click Reset to return the screen to its last-saved settings.
UAG4100 User's Guide
164
Assured Forwarding (AF) PHB for