Policy Route Edit Screen - ZyXEL Communications ZyWALL USG 50 User Manual

13.2.1 Policy Route Edit Screen

Click Configuration > Network > Routing to open the Policy Route screen.
Then click the Add or Edit icon to open the Policy Route Edit screen. Use this
screen to configure or edit a policy route.
Figure 179 Configuration > Network > Routing > Policy Route > Add
The following table describes the labels in this screen.
Table 78 Configuration > Network > Routing > Policy Route > Edit
LABEL
Create new
Object
Configuration
Enable
Description
Criteria
User
ZyWALL USG 50 User's Guide
DESCRIPTION
Use this to configure any new settings objects that you need to use in
this screen.
Select this to activate the policy.
Enter a descriptive name of up to 31 printable ASCII characters for the
policy.
Select a user name or user group from which the packets are sent.
Chapter 13 Policy and Static Routes
293