Janome DigitizerPro Instruction Book page 78

Resize motif
outline to scale
To use the original size and orientation of the motif
Enter
press .
To scale the motif, move the pointer until the motif is
the required size, click, then press
Selecting motifs for motif runs
Use Digitize > Motif Run to create a string of
motifs along a digitized line.
You can select motifs to use before or after
digitizing a motif run. If you use Motif Run without
selecting a motif, a default
a motif after digitizing, use the Object Details
dialog as described here.
Note For a complete catalog of samples, see
Stamps, Motifs and Border
To select a motif for motif runs
1 Double-click a Motif Run object.
The Object Details > Line Stitch > Motif Run dialog
opens.
Enter
.
will be used. To change
Samples.
JANOME Embroidery Software Instruction Book
Chapter 10 Embroidery Stamps and Motifs
2 Select a pattern from the dropdown list.
OK
3 Click .
The selected Motif Run object is updated according to
the motif selected.
Try this! Select a motif with no object selected and
OK
click to make the selection current.
Sizing and spacing motifs in motif runs
Use Digitize > Motif Run Line to create a string of
motifs along a digitized line.
Set the exact size and spacing of motifs in a Motif
Run via the Object Details dialog before or after
digitizing.
To size and space motifs in a motif run
1 Double-click a Motif Run object.
The Object Details > Line Stitch > Motif Run dialog
opens.
76