Janome DigitizerPro Instruction Book page 183

To move two handles in opposite directions, hold the
Shift key down while dragging a handle.
To move the handles in the same direction, hold
down the Ctrl key while dragging a handle.
5 Press Esc to complete.
Try this! To adjust the
lettering object and press H.
Editing lettering in Lettering Art
You can edit lettering in Lettering Art in the Object
Details > Lettering dialog.
To edit lettering in Lettering Art
1 Double-click the lettering object.
Drag handle
Shift + drag
handle
Ctrl + drag
handle
control points, select the
JANOME Embroidery Software Instruction Book
Chapter 23 Special Lettering Features
The Object Details > Fill Stitch dialog opens.
2 Select the Lettering tab.
3 Edit the text as required.
4 Press OK.
The lettering is updated.
Removing Lettering Art
Use Lettering > Lettering Art > None to return an object
to its original shape.
Return an object to its original shape by removing
the Lettering Art.
To remove Lettering Art
Select the lettering object.
Select Lettering Art > None.
The Lettering Art is removed and the letters return to
their original shape.
Creating flair script designs
Use Lettering > Lettering to add embroidery
lettering to designs or edit selected lettering.
Flair script is a special font which allows you to add
decorative flairs to the end of text objects,
mimicking flamboyant handwriting flourishes.
181