Janome DigitizerPro Instruction Book page 39

Traveling by color
Use View > Jump by Color in conjunction with
Forward and Back icons to travel to the previous
or next color change.
Use the Jump by Color tool or keyboard shortcuts
to travel through the design by color. This is useful
if you need to locate a specific color change in
order to insert an object or delete it from the
stitching sequence. See also
& Index.
To travel by color
To travel to the previous or next color, click the Jump
by Color icon, then click the Back or Forward travel
icon.
Traveling by stitches
You can use the shortcut keys to travel by stitches
through your design in EasyDesign. Press Esc,
then press the left and right arrows to jump
backwards by 1 stitch, the up and down arrows by
10 stitches, and the keypad '+' and '-' by 100
stitches. See also Traveling by
+10
-1 +1
-10
Traveling through designs in
EasyEdit
When working with embroidery designs, you need
to understand the stitching sequence. You can view
a design's stitching sequence in EasyEdit by
'traveling' through it by stitches or colors. JANOME
Embroidery Software simulates stitching out by
Appendices, Glossary
stitches.
JANOME Embroidery Software Instruction Book
changing stitches from black to their allocated
thread color as they are 'stitched'. See also
Editing.
Traveling to the start or end of a design
Use View > Jump to Start/End of Design in
conjunction with Forward and Back icons to travel
to the start or end of a design.
Click View > Forward to travel forwards through
the stitch sequence.
Click View > Back to travel back through the stitch
sequence.
Use the Jump to Start/End of Design tool or
keyboard shortcuts to travel quickly to the start or
end of the stitching sequence. See also
Appendices, Glossary &
To travel to the start or end of a design
To travel to the start of the design, click the Jump to
Start/End of Design icon, then click the Back travel
icon.
To travel to the end of the design, click the Jump to
Start/End of Design icon, then click the Forward
travel icon.
Traveling by color
Use View > Jump by Color then use the Forward
and Back icons to travel to the previous or next
color change.
Click View > Forward to travel forwards through
the stitch sequence.
Click View > Back to travel back through the stitch
sequence.
Use the color travel tool or keyboard shortcuts to
travel through the design by color. This is useful if
you need to locate a specific color change in order
to insert a stitch or delete it from the stitching
sequence. See also Appendices, Glossary &
Chapter 5 Viewing Designs
Stitch
Index.
Index.
37