Janome DigitizerPro Instruction Book page 50

4 Select a color from the palette or mix your own. See
Mixing your own background color
5 Click OK.
Inside hoop area recolored
Changing background fabrics
Set the color inside the hoop to match the color of
the fabric you intend to stitch out on. See also
Working with fabrics.
To change the background fabric
1 Select Setup > Work Environment or right-click the
Design Window and select from the popup menu.
The Work Environment dialog opens.
2 Select the Fabrics option.
The dialog changes as shown.
Click to choose
sample
Fabric preview
3 Click the Browse Fabrics button.
The Select Fabric dialog displays a selection of fabric
samples to choose from.
for details.
Outside hoop area recolored
JANOME Embroidery Software Instruction Book
Try this! You can add your own fabric samples to the
Fabrics folder in any of the supported file formats. You
can also browse to another folder on your PC and
select a file in any of these formats. See also
Supported embroidery file
4 Select a fabric sample and click Open or simply
double-click the file.
The selected fabric is displayed in the hoop preview in
the Work Environment dialog.
5 Click OK.
The selected fabric is applied to the whole Design
Window.
Mixing your own background color
Use Setup > Work Environment to mix a new background
color.
You can create a new background color for use with
the current design. Each new design uses the
default colors.
To mix your own background color
1 Select Setup > Work Environment.
The Work Environment dialog opens.
2 Select a color slot in the palette.
3 Click Mix Color.
The Color dialog opens.
Chapter 7 Grids and Hoops
formats.
Click to mix color
Select color to
replace
48