Janome DigitizerPro Instruction Book page 159

To split stitch blocks
1 Select the object you want to split.
2 If working in EasyEdit, click the Stitch Mode icon.
3 Travel to the stitch needlepoint where you want to split
the object. See Traveling by stitches
Try this! In EasyEdit, simply click the needle point at
which you want to split the stitch block.
4 Click the Split Block icon.
This splits the object at the selected needlepoint –
stitches that come before and after in the stitching
sequence are split into separate objects or 'stitch
blocks'.
Deleting stitches
Use Edit > Stitch Mode to select individual stitches
for deletion.
You can delete individual or groups of selected
stitches.
Warning If an object's stitches are regenerated
for any reason, all stitch editing functions are lost.
Where possible, edit the
individual stitches. See
spacing, Adjusting Weave Fill stitch spacing
Adjusting Embossed Fill spacing
To delete stitches
1 In EasyEdit, click the Stitch Mode icon.
for details.
Locate the needle
point at which you
want to split the object
Split into two blocks
object details rather than
Adjusting Satin stitch
and
for details.
JANOME Embroidery Software Instruction Book
2 Select a stitch or stitches.
3 Press Delete.
Select stitches
Chapter 20 Stitch Editing
Press
Delete
157