Janome DigitizerPro Instruction Book page 49

Setting grid spacings
Use grid lines to help accurately align or size
embroidery objects. Turn on or off the grid, or
change grid spacing as required.
To set grid spacings
1 Select Setup > Work Environment.
The Work Environment > Display tab opens.
2 Select the Display Grid checkbox to display the grid.
Select
Display Grid
3 Adjust Grid Spacing by moving the slider.
The spacing value is displayed above the slider.
Try this! To use these settings as
current template, click Save. See also
designs.
4 Click OK.
Grid spacing: 20 mm
Changing backgrounds
In JANOME Embroidery Software, you can set the
color inside the hoop to match the fabric you intend
to stitch out on. You can also set a background
color outside the hoop by way of contrast.
Alternatively, you can add background fabrics
based on samples packaged with the software.
Backgrounds are treated as
saved with the design.
defaults for the
Creating new
Grid spacing: 10 mm
design details and are
JANOME Embroidery Software Instruction Book
Changing background colors
Use Setup > Work Environment to change background
colors.
Set the color inside the hoop to match the fabric
you intend to stitch out on. You can also set a
background color outside the hoop by way of
contrast. See also Working with
To change the background color
1 Select Setup > Work Environment or right-click the
Design Window and select from the popup menu.
Choose Work
Environment
The Work Environment dialog opens.
Choose to change
background inside
or outside hoop
2 If not already selected, select the Colors option.
3 Select the Inside Hoop or Outside Hoop option as
required:
Option Purpose
Outside When selected, you choose a background
Hoop color to apply to the area outside the hoop,
or when the hoop is not displayed, to the
whole Design Window.
Inside When selected, a background color can
Hoop be applied within the hoop.
Chapter 7 Grids and Hoops
fabrics.
47