Janome DigitizerPro Instruction Book page 203

In the unlikely event that a file exceeds the
limits set, it will be split into two or more files.
See Splitting large files
Note For detailed procedures relating to your
particular machine, see
Sending or receiving multiple designs
As with single designs, the procedure for sending
multiple designs to machine varies slightly with the
machine model you are using.
Select source
folder on your PC
Select files to
send
Use buttons to
navigate folders of
display file list
In addition to sending design files to machine, you
can generally receive or delete files from the
destination folder.
Receive or
delete files
from machine
location
Note For detailed procedures relating to your
particular machine, see
for details.
Outputting to Machine.
Select files to
receive or delete
Outputting to Machine.
JANOME Embroidery Software Instruction Book
Chapter 25 Reading and Writing Design Files
Writing to Flash Memory
reader/writer
Use Standard > Write to Card to send a design to
an ATA PC card.
You can use an external 'Flash Memory' (ATA PC)
reader/writer to write designs in JEF format
directly to card. Some machines do not support
direct connection, in which case you will need to
use this method to transfer design files from your
PC to ATA PC card to machine. Depending on the
machine model the card is intended for, make sure
this is selected as your current machine. After
writing your design, simply insert the card into the
ATA PC card slot of your machine, and read in the
design.
Writing a design to ATA PC card
The procedure for writing a single design to card
varies slightly with the machine model, but the
principle is the same. Whichever machine you are
using, the steps will involve one or all of the
following:
Select the machine model you intend to write to.
See Selecting machine models
Make sure the reader/writer is securely plugged
into the USB port of your PC.
Open or create the design you want to send.
Click the Write to Card icon or select External
Media > Write a Design.
The particular dialog which opens will depend on
the selected machine model.
Click to
change name
of output file
Click to write
design to card
Start the file transfer.
In the unlikely event that a file exceeds the
limits set, it will be split into two or more files.
See Splitting large files
for details.
for details.
201