Janome DigitizerPro Instruction Book page 240

Capabilities
Position and align objects
Lock and group objects
Scale objects
Rotate objects
Skew objects
Flip objects
Create large layouts
Reshape objects
Reshape circle objects
Adjust stitch angles
Change entry and exit points
Object Details, Fabrics and Templates
Set current object details
Change details of selected objects
Change underlays
Apply automatic underlay
Compensate for fabric stretch
Change fabric settings
Manage fabrics
Create design templates
Advanced Digitizing Techniques
Reinforce outlines
Cut holes in objects
Remove underlying stitching
Fill holes in objects
Create offset objects
Create feathered edges
Create gradient fill effects
Create open stitching effects
Digitize appliqué
Editing Stitches
Select stitches
Feature Name EasyDesign
Align
Reshape
Reshape
Reshape
Reshape
Backtrack/Repeat
Cut Hole
Remove Overlaps
Fill Holes
Offset Object
Feather Edge
Gradient Fill
Travel on Edge
Appliqué
EasyEdit Reference
Positioning and aligning objects
Locking and grouping objects
Scaling objects
Rotating objects
Skewing objects using click and drag
Flipping objects
Creating ornamental layouts
Reshaping objects
Reshaping circle objects
Adjusting stitch angles
Changing entry and exit points
Object Details, Fabrics and Templates
Setting current object details
Changing details of selected objects
Changing underlays
Applying automatic underlay
Compensating for fabric stretch
Changing fabric settings
Managing fabrics
Creating design templates
Advanced Digitizing Techniques
Reinforcing outlines
Cutting holes in objects
Removing underlying stitching
Filling holes in objects
Creating offset objects
Creating feathered edges
Creating gradient fill effects
Creating open stitching effects
Digitizing appliqué
Editing Stitches
Selecting stitches