Janome DigitizerPro Instruction Book page 168

Note Orientation of the text around the oval depends
on where you mark the reference points.
3
1 2
Try this! You can adjust orientation settings at any
stage. See Adjusting orientations
Creating custom orientations
Use Free Line orientation to shape lettering
around elements in your design. Digitize Free Line
baselines by marking reference points to form the
required line. The number of reference points and
length of baseline are practically unlimited.
Try this! If the baseline has tight curves, or sharp
corners, the letters may overlap. For best results,
only mark curve points, and digitize lines which
have shallow, gentle curves.
To create a custom orientation
1 In the Object Details > Lettering dialog, click the Any
Shape orientation icon.
Select Any Shape orientation
2 Enter your text in the text entry box.
3 Click
4 Mark the baseline reference points.
5 Press
3
2 1
Adjusting letter spacing
for details.
Letter and line spacings can be determined before
or after creating lettering objects and placing them
in your design. You can edit spacing using the
Reshape tool.
Adjusting overall letter spacing
on-screen
The spacing between letters is calculated
automatically as a percentage of the letter height.
In most cases the
Sometimes, however, you may want to change the
overall letter spacing.
To adjust overall letter spacing on-screen
1 Select the lettering object.
2 Click the Reshape icon.
JANOME Embroidery Software Instruction Book
Chapter 21 Creating Embroidery Lettering
OK
.
Mark curve points with the right mouse button.
Mark corner points with the left mouse button.
Enter
to complete.
2
1
Try this! You can adjust orientation settings at any
stage. See Adjusting orientations
Click Edit > Reshape to change letter spacing.
default
4
3
for details.
spacing is adequate.
166