Janome DigitizerPro Instruction Book page 165

Select
orientation
The orientation you choose depends on the effect you
want to achieve. You need to digitize different
reference points depending on the type selected.
Options include:
Horizontal: See Creating horizontal orientations
details.
Vertical: See Creating vertical orientations
Any Shape: See Creating custom orientations
details.
Circle CCW: See Creating circular orientations
details.
Circle CW: See Creating circular orientations
details.
Note If you are using the JANOME Digitizer MB
product level, another baseline option is available –
Fixed Line. See Creating fixed-length horizontal
orientations for details.
Fixed Line
baseline
OK
4 Click .
Creating horizontal orientations
Free Line baselines are straight, horizontal
baselines. Free Line does not have a fixed or
pre-determined length – the baseline extends as
long as you keep adding letters.
To create a horizontal orientation
1 Create a new lettering object. See
lettering for details.
2 Select Free Line as the orientation.
3 Click
Creating fixed-length horizontal
orientations
for
Both Free Line and Fixed Line
for details.
straight, horizontal orientations. However, Fixed
for Line – available only in JANOME Digitizer MB – has
a fixed length which you can digitize on-screen or
specify numerically. If the text extends beyond the
for
baseline, lettering size and/or spacing is reduced
according to the chosen reduction method.
for
Note The Fixed Line option is specifically
intended for cap production, supported by the
MB-4 machine. See also
sequencing.
To create a fixed-length horizontal
orientation
1 Create a new lettering object. See
2 Select Fixed Line as the orientation.
Creating embroidery
3 Adjust the baseline length in the Fixed Length field as
JANOME Embroidery Software Instruction Book
Chapter 21 Creating Embroidery Lettering
Free Line
baseline
OK
and click on-screen to establish the start-point
of the baseline.
Try this! You can adjust orientation settings at any
stage. See Adjusting orientations
lettering for details.
Fixed Line
baseline
required.
Free Line – click
on-screen to mark
start point
for details.
baselines form
Changing letter
Creating embroidery
163