Janome DigitizerPro Instruction Book page 68

OK
3 Click .
Stitch Spacing: 0.4 mm
Adjusting Weave Fill stitch length
Specify the stitch length generated for Weave Fill
objects. The stitch length varies slightly in Weave
Fill fills to ensure that small stitches are not
generated at the edges of the shape.
To adjust Weave Fill stitch length
1 Select and double-click the Weave Fill object.
The Object Details > Fill Stitch dialog opens.
2 In the Stitch Length field, enter the stitch length you
require.
OK
3 Click .
Length: 2.5 mm
Minimum Stitch: 0.4 mm
Creating embossed fills
Embossed Fill is a decorative stitch type used to
fill wide and large areas with decorative patterns
while keeping the appearance of a solid field of
stitching.
Stitch Spacing: 0.8 mm
Adjust stitch length
Length: 4.5 mm
Minimum Stitch: 0.4 mm
JANOME Embroidery Software Instruction Book
Chapter 9 Outline & Fill Stitches
Embossed Fill needle penetrations form a tile
pattern. The pattern is repeated along a grid. You
can change stitch values to give an even greater
variation.
Creating fills with Embossed Fill
Create Embossed Fill objects with the following
procedure.
To create fills with Embossed Fill
1 With no objects selected, click the Object Details icon.
The Object Details > Fill Stitch dialog opens.
2 Select Embossed Fill.
3 Create an object with the Parallel Fill or Turning
Angle Fill tool.
Turn on Visualizer or view Display Needle Points to
see the effect of Embossed Fill.
Selecting an Embossed Fill pattern
You can select from many Embossed Fill patterns.
Generally the default size and spacing will produce
the best results, but you may like to change the
stitch angle.
To select an Embossed Fill pattern
1 Select and double-click the Embossed Fill object.
The Object Details > Fill Stitch dialog opens.
2 From the Pattern dropdown list, select the required
pattern.
A preview of the pattern appears.
OK
3 Click .
Select Embossed Fill
Select pattern
66