Janome DigitizerPro Instruction Book page 169

3 Drag the letter spacing
adjust the spacing of all letters along the baseline.
4 Release the mouse button to complete and press
to finish.
Adjusting individual letter spacing
on-screen
Use Edit > Reshape to change individual letter
spacing.
The spacing between letters is calculated
automatically as a percentage of letter height. In
most cases the default
Sometimes, however, the spacing between certain
letters may appear too large or too small,
depending on the shape of neighboring letters. To
compensate for this visual effect, you can move
one or several selected letters closer or further
apart along the baseline
also Transforming lettering with
To adjust individual letter spacing on-screen
1 Select the lettering object.
2 Click the Reshape icon.
3 Click the diamond control point
letter.
Drag letter spacing
control point
control point left or right to
spacing is adequate.
to improve spacing. See
Select.
in the middle of the
JANOME Embroidery Software Instruction Book
Chapter 21 Creating Embroidery Lettering
Try this! To select multiple or a range of letters, hold
Ctrl Shift
down or
4 Drag the letter/s along the baseline to adjust the
spacing.
Esc
Try this! Alternatively, to move multiple letters,
right-click the diamond control point of the first letter
and drag. All letters to the end of the line move as one.
5 Release the mouse button to complete and press
to finish.
Adjusting line spacing on-screen
Use Edit > Reshape to change line spacing.
Change the space between lines in a multiple-line
lettering object using the Reshape tool.
To adjust line spacing on-screen
1 Select the lettering object.
2 Click the Reshape icon.
3 Drag the line spacing
change line spacing.
Click diamond control point and hold
down Ctrl as you select
as you select.
control point up or down to
167
Esc