Janome DigitizerPro Instruction Book page 181

Changing lettering stitch types
By default, lettering objects are filled with Satin
Fill. You can also apply other basic fill stitch types,
such as Weave Fill, as with other embroidery
objects. See Selecting fill stitches
Adjusting Satin Fill settings for lettering
objects
By default, lettering objects are filled with Satin
Fill. Where a letter is narrow, stitches are tight,
thus requiring fewer stitches to cover the fabric.
Where a column is very narrow, stitches need to be
less dense because too many needle penetrations
can damage the fabric. See also
To adjust Satin Fill settings for lettering
objects
1 Double-click a selected lettering object.
The Object Details > Fill Stitch dialog opens.
2 Move the slider to set the stitch density you want for
your lettering.
3 Click OK.
for details.
Adjusting Weave Fill settings for
lettering objects
You can fill lettering shapes with Weave Fill
stitching. It is suitable for filling large, irregular
lettering shapes. See also
Creating satin fills.
To adjust Weave Fill settings for lettering
objects
1 Double-click a selected lettering object.
2 Select Weave Fill.
3 Select a Weave Fill Pattern. See
Density: 50%
Density: 100%
4 Adjust stitch spacing to increase or decrease density.
Density: 150%
JANOME Embroidery Software Instruction Book
Chapter 23 Special Lettering Features
Try this! Add extra texture to lettering by applying
Feather Edge. See Applying Feather Edge
The Object Details > Fill Stitch dialog opens.
patterns for details.
See Adjusting Weave Fill stitch spacing
for details.
Creating weave fills.
Selecting Weave Fill
Pattern 4
Pattern 8
for details.
179