Janome DigitizerPro Instruction Book page 67

To reduce the density for more open stitching, move
the slider to the left.
OK
3 Click .
Density reduced
Density increased
Creating weave fills
Weave Fill stitch consists of rows of run stitches
and is suitable for filling large, irregular shapes.
Stitches are laid in rows going back and forth
across the shape. These can be parallel or slightly
turning. Stitch offsets in each row are used to
eliminate horizontal split lines.
You can control stitch density in Weave Fill objects
by adjusting the pattern, stitch spacing and length.
Creating objects with Weave Fill
Create Weave Fill objects with the following
procedure.
To create objects with Weave Fill
1 With no objects selected, click the Object Details icon.
The Object Details > Fill Stitch dialog opens.
2 Select Weave Fill.
3 Create an object with the Parallel Fill or Turning
Angle Fill tool.
Select Weave Fill
JANOME Embroidery Software Instruction Book
Chapter 9 Outline & Fill Stitches
Selecting Weave Fill patterns
You can select from many Weave Fill patterns.
Generally the default size and spacing will produce
the best results, but you may like to change the
stitch angle.
To select a Weave Fill pattern
1 Select and double-click the Weave Fill object.
The Object Details > Fill Stitch dialog opens.
Select weave
pattern
2 Click the 'spin box' to cycle through a list of patterns, or
enter the number directly into the field.
OK
3 Click .
Adjusting Weave Fill stitch spacing
For Weave Fill, stitch density is determined by the
distance between each row of stitches. The spacing
setting is the distance between two forward rows.
Row spacing
Stitch length
Row direction
To adjust Weave Fill stitch spacing
1 Select and double-click the Weave Fill object.
The Object Details > Fill Stitch dialog opens.
2 In the Stitch Spacing field, enter the new spacing
value.
This value is the distance between each forward row of
stitching.
To increase the density, enter a smaller value.
To decrease the density, enter a larger value.
Adjust stitch spacing
65