Janome DigitizerPro Instruction Book page 156

With JANOME Embroidery Software EasyDesign
stitches are automatically generated from design
outlines and properties. This means you can scale,
transform and reshape JANOME Embroidery
Software designs without affecting stitch density
or quality.
The JANOME Embroidery Software EasyEdit
application allows you to work with traditional
stitch-based designs in the SEW or JEF format.
Using EasyEdit, you can fine-tune your designs
without having to convert them into JAN format.
EasyEdit lets you edit individual stitches. You
simply select them like any other object and move
the needlepoint position as required. You may
need to do this particularly when working with 'stitch' files which do not contain
design outline data. See
This section describes how to select and edit the stitches in a stitch-based
design, using JANOME Embroidery Software EasyEdit.
Selecting stitches
The Stitch Mode tool lets you select single
stitches, several stitches, or a range of stitches by
selecting their needle points, or dragging a
bounding box around them. Selected stitches are
highlighted in a different color.
Selecting all stitches in a design
Select all stitches to apply changes to a whole
design. See also Quick Reference.
To select all stitches in a design
Select Edit > Select All or press Ctrl + A.
Sizing handles appear around the entire design.
Stitch Editing
Embroidery design formats
No stitches selected
To deselect, press X or Esc.
Selecting stitches by needle point
Use Edit > Stitch Mode to select individual stitches
for editing.
Chapter 20
for details.
All stitches selected
154