Janome DigitizerPro Instruction Book page 138

current values for the same setting, the field will be
blank. If you enter a new value, it will apply to both
objects.
selected objects
Note Changing the details of existing objects does
not affect the current or
details of any objects not currently selected. See
also Working with fabrics.
To change details of selected objects
1 Select the object/s whose details you want to change.
2 Double-click to open the Object Details dialog.
3 Select the tab you want and change the settings as
required.
4 Click OK.
Stabilizing with underlays
JANOME Embroidery Software generates underlay
stitching automatically based on current settings.
These are stored with each object in the same way
as other object details. They are regenerated
whenever the object is scaled or transformed.
EasyDesign lets you adjust values to suit different
fabrics, lettering appearance and size.
Larger areas and stretchy fabrics such as knits and
pique generally need more underlay than smaller
areas and firm fabrics such as drill or leather. At
times, when you want a full design with extra lift
under the stitches, a weave underlay is preferable.
On knits, edge run is best. See also
fabrics.
Applying automatic underlay
Use Edit > Underlay to apply automatic underlay
to new or selected objects.
Values of
changed
default settings, nor the
Working with
JANOME Embroidery Software Instruction Book
Chapter 18 Object Details, Fabrics and Templates
The Underlay tool is a toggle button that allows
you to apply automatic underlay to new or selected
objects based on current settings. The Underlay
button is deselected by default.
To apply automatic underlay
With or without objects selected, click the Underlay
icon.
With no objects selected, underlay stitches are
automatically generated for all new objects. For both
new or selected objects, automatically generated
underlay stitches are based on current properties.
With or without objects selected, click the Underlay
icon to toggle the effect off.
Changing underlays
JANOME Embroidery Software provides a selection
of underlay types to choose from:
In addition to the basic underlay stitch types –
Center Run, Zigzag, Edge Run, and Weave –
JANOME Embroidery Software also provides a
selection of underlay combinations such as Double
136
Without
underlay
With
underlay
Center Run
underlay
Zigzag
underlay
Edge Run
underlay
Weave
underlay