Janome DigitizerPro Instruction Book page 14

2 Select No to the Windows Update and click Next.
3 Select the automatic installation options, insert your
installation CD into the CD ROM drive, and click Next.
The installation will search for a suitable device driver
and prompt you to choose if it finds more than one copy
on your system.
Note The MC11000 (Jsmc860 Device) drivers are
copied to the hard drive when the software is installed
and don't actually require the installation CD. The
MC10001 machine requires the installation CD while
the Wizard is running in order for the (Jsmc850 Device)
drivers to be installed.
4 Choose an option and click Next to start installing.
JANOME Embroidery Software Instruction Book
The following dialog appears when installation is
complete.
5 Click Finish to close and restart your computer.
Setting up scanners
Use Image > Scanner Setup to setup scanners.
JANOME Embroidery Software supports
TWAIN-compatible scanners.
Note Peripheral devices can be connected to your
computer via serial ports, parallel ports, a
specialized network card or an ethernet network.
To set up scanners
1 Connect the scanner using the accompanying
instructions.
2 Set it up in Windows using the accompanying
instructions and/or the Microsoft Windows
documentation.
3 Start JANOME Embroidery Software.
4 Select Image > Scanner Setup.
The Select Source dialog opens displaying a list of
scanner drivers loaded on your computer.
5 Select the scanning driver to use, then click Select.
Chapter 2 System Setup
12