Janome DigitizerPro Instruction Book page 179

Changing letter sequencing
Click Lettering > Lettering to change letter
sequencing.
With the JANOME DigitizerPro product level, you
can specify the sequence in which letters are
stitched to minimize registration problems with
caps or difficult fabrics. Stitch the lettering from
left to right (the default
This is especially useful when stitching on caps.
See also Creating fixed-length horizontal
orientations.
To change letter sequencing
1 Click the Lettering icon.
The Object Details > Lettering dialog opens.
Adjust letter
stitching sequence
2 Select a letter stitching sequence in the Letter
Sequence panel. Options include:
In Line: When selected, lettering is stitched from left
to right (the default).
Stitched left-to-right
Center Out: When selected, letters to the left of
center are stitched first, going from right to left. Next
letters to the right of center are stitched, going from
left to right.
setting) or from center out.
JANOME Embroidery Software Instruction Book
Chapter 22 Editing Embroidery Lettering
Left side stitched first
Right side stitched second
OK
3 Click .
Try this! Travel through your design to check the
stitching sequence. See
details.
Simulating design stitchout
177
for