Janome DigitizerPro Instruction Book page 54

2 Choose the hoop you want to work with from the
dropdown list. See Selecting hoops
3 Click the Combine Mode icon.
This places the design in Combine Mode view and
enables the Add Hoop and Calculate Hoopings tools.
Note The first hoop cannot be moved until a second
hoop is placed in the design. Once added, the first can
be moved anywhere in the design.
4 Click the Add Hoop button to add another hooping.
5 Position this over the design elements you want to
stitch first.
Warning If you want a repeating design to sew out in
a separate hooping, make sure it is grouped before
creating your ornamental layout. See
ornamental layouts
6 Repeat these steps as required.
for details.
Creating
for details.
JANOME Embroidery Software Instruction Book
Try this! You can select a different hoop at any time.
This will change all hoopings in the design.
7 Re-position additional hoops and, if necessary, rotate
them so that they completely cover all objects in the
design.
Click the Rotate Hoop icon with left or right mouse
buttons to rotate a selected hoop 45° in either
direction.
Alternatively, click the hoop again and rotate hoops
by means of rotation handles and rotation
center-point.
Try this! Nudge selected hoops into position using the
Arrow keys.
8 Delete hoops as required with the Delete Hoop icon or
Delete key on your keyboard.
9 Repeat these steps until all design elements are
covered.
All covered design elements are displayed in green.
10 Finally, click the Calculate Hoopings icon to evaluate
the hoopings that will result from the current hoop
layout.
Chapter 7 Grids and Hoops
52