Janome DigitizerPro Instruction Book page 36

To zoom in on a section of the design, press the B key
on your keyboard, then drag a bounding box around
the zoom area.
Click & drag
bounding box around
area to zoom
To pan across a design in the Design Window, select
View > Pan or press P. Move the 'pan box' over the
part of the design you want to view and left-click.
EasyDesign centers the Design Window around the
point you clicked.
Working with the Overview Window
Use View > Overview Window to toggle Overview
window display on/off. Use it to view a thumbnail
of the design.
Use the Overview Window to view a thumbnail of
the design. The window updates whenever you
make a change and can be used to zoom in or pan
across the Design Window. See also
panning designs.
Note To change the view settings for the Overview
window, click it to make it the active window. See
Design viewing modes
To work with the Overview Window
1 Click the Overview Window icon.
Place 'pan box'
over area to view
and click
Zooming and
for details.
JANOME Embroidery Software Instruction Book
The Overview window opens.
Click for
zoom box
2 To zoom in or out, click the Zoom button at the bottom
of the window and drag a bounding box around the
area to zoom.
3 To pan across the design, move the cursor inside the
zoom box – it changes to a four-way arrow cursor – and
drag it.
Drag zoom
box to area to
pan
Chapter 5 Viewing Designs
Drag bounding
box around area
to zoom
34