Janome DigitizerPro Instruction Book page 72

digitized line. The stitches follow the digitized line
but maintain uniform density and needle
penetration patterns. The digitizing method varies,
depending whether you are applying the effect to
new or existing objects.
To create a Florentine effect
1 Create a Weave Fill object. See
details.
2 Click the Florentine Effect icon.
Try this! Use the Reshape Object tool to change the
shape of the curve. See
Creating decorative outlines
EasyDesign provides a range of decorative stitches
for use as borders. Available stitch types include
backstitch, stemstitch, and candlewicking.
Try this! You can also create decorative stitch
effects with pattern runs. See
for details.
Creating backstitch outlines
Use Digitize > Backstitch to digitize backstitch
outlines.
Creating weave fills
Reshaping objects for details.
Creating motif runs
JANOME Embroidery Software Instruction Book
Backstitch is an older-style, adaptable stitch which
can be used for delicate outlines. This stitch follows
intricate curves well.
for
To create a backstitch outline
1 Click the Backstitch icon and digitize a backstitch
outline as you would a run stitch outline. See
lines for details.
2 Double-click to access
3 If not already applied, select Backstitch Line from the
Stitch Type list.
4 Adjust the Stitch Length and Stitch Thickness as
required.
Stitch Length:
3.0 mm
5 Adjust the Overlap as required.
Chapter 9 Outline & Fill Stitches
Digitizing
object details.
Stitch Length:
1.5 mm
70