Janome DigitizerPro Instruction Book page 178

Reshape Circle CCW and Circle CW orientations
to change curve depth, justification point and
baseline length. See also
orientations.
To reshape a circular orientation
1 Select the lettering object.
2 Click the Reshape icon to display
Try this! The large diamond and cross represent
stitching start and end points. You may need to move
them to access baseline control points. They will
reposition themselves in the new entry and exit points
based on the changes you make to the baseline.
Baseline control
points
3 To resize the circle drag up or down either the control
point on the circumference of the circle or in the center.
Drag up or down to resize
the circle
4 Create an arc baseline from a circular one by dragging
the hollow square control point apart.
Move the hollow square
control point apart
Esc
5 Press to complete.
Setting lettering
control points.
JANOME Embroidery Software Instruction Book
Chapter 22 Editing Embroidery Lettering
Reshaping custom orientations
Use Edit > Reshape to reshape lettering
orientations.
Reshape Any Shape orientations by moving,
changing, adding or deleting
the baseline. See also
orientations.
To reshape a custom orientation
1 Select the lettering object.
2 Click the Reshape icon to display control points.
Try this! The large diamond and cross represent
stitching start and end points. You may need to move
them to access baseline control points. They will
reposition themselves in the new entry and exit points
based on the changes you make to the baseline.
3 To adjust the baseline add, delete, change or move
reference points like any embroidery object. See
Reshaping objects for details.
4 To reshape the baseline, click the point on the baseline
where you want it to bend (change direction).
Left-click to bend the line at an angle.
Right-click to bend the line into a curve.
Click and drag the
baseline where you
want it to bend
5 To re-position the baseline, drag any one of the
baseline control points up or down.
Drag to change curvature
Esc
6 Press to complete.
control points along
Setting lettering
Baseline control points
176