Janome DigitizerPro Instruction Book page 38

Current stitch
cursor
Start of design
End of design
Viewing and hiding images
Use View > Display Images to show and hide
backdrops.
You can show or hide a bitmap
temporarily while you digitize. Hiding backdrops
does not delete them from the design.
To view or hide images
Click the Display Images icon or press D.
When selected, backdrop images are visible.
Backdrop image visible
To hide the image, click Display Images or press D
again.
Traveling through designs
When working with embroidery designs, you need
to understand the stitching sequence. You can view
a design's stitching sequence in EasyDesign by
'traveling' through it by colors or objects. JANOME
Embroidery Software simulates stitching out by
changing stitches from black to their allocated
thread color as they are 'stitched'.
backdrop
Backdrop image hidden
JANOME Embroidery Software Instruction Book
Traveling to the start or end of a design
Use View > Jump to Start/End of Design in
conjunction with Forward and Back icons to travel
to the start or end of a design.
Click View > Forward to travel forwards through
the stitch sequence.
Click View > Back to travel back through the stitch
sequence.
Use the Jump to Start/End of Design tool or
keyboard shortcuts to travel quickly to the start or
end of the stitching sequence. See also
Appendices, Glossary &
To travel to the start or end of a design
To travel to the start of the design, click the Jump to
Start/End of Design icon, then click the Back travel
icon.
To travel to the end of the design, click the Jump to
Start/End of Design icon, then click the Forward
travel icon.
Traveling by object
Use View > Jump by Object in conjunction with
Forward and Back icons to travel to the previous
or next object.
Click View > Forward to travel forwards through
the stitch sequence.
Click View > Back to travel back through the stitch
sequence.
In EasyDesign, use the object travel tool or
keyboard shortcuts to travel through the design by
object. This technique is useful if you need to
locate a specific object in order to insert another
object or delete it from the stitching sequence. Use
it in conjunction with the stitch travel tools if you
want to 'nest' an object. See
details. See also Appendices, Glossary &
To travel by object
To travel to the previous or next object, click the Jump
by Object icon, then click the Back or Forward travel
icon.
Note You cannot travel by object in EasyEdit.
Chapter 5 Viewing Designs
Index.
Nesting objects for
Index.
36