Janome DigitizerPro Instruction Book page 172

Editing lettering
Click Lettering > Lettering to edit lettering
on-screen.
When you have created a lettering object, you can
select it and make changes to it directly on-screen
or by adjusting object
To edit lettering
Select a lettering object, and click the Lettering icon.
An I-beam appears after the last letter of the object.
You can move it using arrow keys.
Edit the text as required:
Use the arrow keys to move between letters.
Backspace
Use and
Enter
Press to complete.
Shift + Enter
Try this! Press
With the lettering object selected, change fonts by
selecting another font from the Font list on the
Lettering toolbar.
Select font
Adjust lettering Size and Width settings as required.
See also Scaling lettering.
details.
Delete
keys to remove letters.
to start a new line.
JANOME Embroidery Software Instruction Book
Chapter 22 Editing Embroidery Lettering
Adjust Size and Width
settings
Change slant settings as required.
Change orientation settings as required. See
lettering orientations for details.
Try this! Alternatively, double-click a selected lettering
object or objects. The Object Details > Fill Stitch
dialog opens. Select the Lettering tab and edit settings
as required.
Adjust
details
Edit text
Note Letters are filled with stitches according to
current details in the Object Details > Fill Stitch tab.
See also Changing lettering stitch
Scaling lettering
When you first create lettering, it may be too big
or too small. Size can be adjusted in three ways:
By scaling on-screen with the Select or
Reshape tools.
By adjusting size and height settings in the
Object Details > Lettering dialog.
By adjusting width and height settings in the
Object Details > Dimensions dialog.
Change Change
slant orientation
Setting
types.
170