Janome DigitizerPro Instruction Book page 185

Adding monogram lettering
Click Lettering > Monogramming to add
monograms directly on-screen.
Monogramming fonts provide three sets of the
upper-case alpha characters. The first, known as
the 'left set', is designed to appear on the left side
of a monogram. The second, or 'middle set', is
designed for the middle position(s). And then there
is a 'right set'. Each set is mapped to a specific set
of character equivalents in the alphabet. See
Monogram font mappings
To add monogram lettering
1 Click the Monogramming icon.
The Monogramming dialog opens.
Enter monogram
Select
monogramming font
Adjust height, width
and spacing
2 Select the desired monogramming font.
for details.
JANOME Embroidery Software Instruction Book
Chapter 23 Special Lettering Features
3 Key in the letters comprising the monogram – it doesn't
matter whether you enter characters in upper or lower
case. Any non-alpha characters are ignored.
4 Adjust letter height, width and spacing in the fields
provided.
5 Click OK.
A lettering object is created using the settings entered.
The left-most letter is replaced by its equivalent left
character – e.g. F is replaced by 'Left F'. Similarly, the
right-most letter is replaced by its equivalent right
character – e.g. F is replaced by 'Right F'. All other
letters are left unchanged.
Try this! Add decorative borders such as rectangles,
ovals, and shields to monograms using the Insert
Border tool. Borders are automatically sized to fit the
current design. See Adding borders
Adding monogram accents
Use Embroidery > Insert Design to add ornamental
decorations to designs.
Add ornamental decorations to designs in the same
way as you insert embroidery designs. Adjust the
position and size as required. See also
designs.
To add a monogram accent
1 Open or create a monogram design.
183
for details.
Inserting