Janome DigitizerPro Instruction Book page 174

Enter letter
size and width
Kudos
3 Enter the size of your lettering object in the Size field.
Size 10 mm
4 Enter the width of your lettering object in the Width field
as a percentage of the height.
For wide letters, increase the percentage – e.g.
140%.
For narrow letters, decrease the percentage – e.g.
70%.
OK
5 Click .
Width 100%
Scaling lettering via the Dimensions tab
You can scale your lettering objects vertically,
horizontally and proportionally via the Lettering
tab of the Object Details dialog.
Try this! Change the appearance of an alphabet
by changing the letter width in proportion to the
height. The original width value is 100%.
To scale lettering via the Dimensions tab
1 Double-click selected lettering object/s.
The Object Details > Fill Stitch dialog opens.
2 Select the Dimensions tab.
Adjust width and
height settings
3 Adjust the width and height settings either as absolute
values (mm) or as a percentage of the current settings.
Size 20 mm
Width 70%
Width 150%
JANOME Embroidery Software Instruction Book
Chapter 22 Editing Embroidery Lettering
original
Height 150%
OK
4 Click .
Transforming lettering objects
Apart from scaling, you can use the Select and
Reshape tools to skew and rotate lettering
objects. See also Scaling
Transforming lettering with Select
Use Edit > Select to transform lettering objects
on-screen.
You can transform lettering objects by
manipulating control points
Select tool. See also Scaling lettering with
To transform lettering with Select
1 Click the Select icon and select the lettering object.
The resizing control points appear. See also
lettering with Select.
2 Click the lettering object again.
Another set of control points appear. These let you
rotate and skew the lettering object.
Skew handle
Rotation point
Width 150%
Width and Height 150%
lettering.
on-screen with the
Select.
Scaling
Rotation handle
172