Janome DigitizerPro Instruction Book page 129

Reshaping objects using control points
Click Edit > Reshape to display the control points
of selected objects.
Change object shapes by selecting them with the
Reshape tool and modifying the available
points.
To reshape objects using control points
1 Select the object to reshape.
2 Select the Reshape icon.
Control points appear around the object.
Entry point
Curve control
point
Corner control
point
3 Modify the outline by adding, deleting, changing or
moving the control points, depending on the object type
and the required change.
4 Change entry and exit points, and
required.
Esc
5 Press to finish.
Selecting control points
Control points can be selected individually or
together, for repositioning or modification.
To select control points
Click to select a single control point.
Ctrl
Holding down , click to select multiple control points.
control
Exit point
Moving control points
You can move
shape.
To move control points
stitch angle as
Adding control points
You can add
clicking with the Reshape tool selected.
Note You cannot add control points to objects
created with the Parallel Fill Circle tool. See also
Reshaping circle
JANOME Embroidery Software Instruction Book
Chapter 17 Reshaping and Editing Objects
Click and drag a bounding box around a group of
control points to select.
control points
Click and drag a single control point to a new position.
Similarly, click and drag multiple control points to a new
position.
Use Edit > Reshape to reshape selected objects.
control points
objects.
to change an outline
to object outlines by
127