Janome DigitizerPro Instruction Book page 69

Adjusting Embossed Fill size
You can change the size of a pattern to get
different effects.
To adjust Embossed Fill size
1 Select and double-click the Embossed Fill object.
The Object Details > Fill Stitch dialog opens.
2 In the Size field, enter the size you require.
OK
3 Click .
Size 7.00 mm
Adjusting Embossed Fill spacing
The Embossed Fill spacing setting determines the
distance between patterns. You can change the
horizontal (X) and vertical (Y) spacing between
each repetition.
Spacing X
increased
Spacing Y
increased
To adjust Embossed Fill spacing
1 Select and double-click the Embossed Fill object.
The Object Details > Fill Stitch dialog opens.
Adjust pattern size
Size 5.00 mm
JANOME Embroidery Software Instruction Book
Chapter 9 Outline & Fill Stitches
2 In the Spacing fields, enter a new spacing value.
This value is the distance between patterns – X is the
horizontal and Y the vertical spacing.
To increase spacing, enter a smaller value.
To decrease spacing, enter a larger one.
OK
3 Click .
Spacing X
increased
Spacing Y
increased
Adjusting Embossed Fill stitch angle
You can change the stitch angle
results for each angle.
To adjust Embossed Fill stitch angle
1 Select and double-click the Embossed Fill object.
The Object Details > Fill Stitch dialog opens.
2 In the Rotate field, enter the rotation angle you require.
OK
3 Click .
Adjust pattern spacing
to get the best
Adjust pattern orientation
67