Janome DigitizerPro Instruction Book page 122

Scaling objects
You can scale objects by dragging the selection
handles with the mouse, specifying the exact
dimensions in the Object Details dialog, or by
setting the distance between reference points on
the design. As an object is scaled, the stitch count
changes to preserve the current stitch spacing.
Note Only native JAN designs contain the
complete set of design information required for
100% perfect scaling and transformation.
Scaling objects using click and drag
You can change the height and width of an object,
or scale it proportionally using the selection
handles. Scale objects individually, or select
multiple objects and scale them together.
To scale objects using click and drag
1 Select the object/s to scale.
Eight selection handles appear around the object.
2 Click and drag a selection handle to resize the object.
Drag
Scale proportionally
To scale height and width proportionally, use a corner
handle.
Drag
Scale vertically
To change the height, use the handles at the
center-top or center-bottom.
Shift + drag
Scale proportionally
about center
JANOME Embroidery Software Instruction Book
Chapter 16 Arranging and Transforming Objects
Scale horizontally
To change the width, use the handles at the
center-sides.
Try this! To resize around a center anchor, hold down
Shift while you resize.
Shift + drag
Scale
vertically in
both
directions
Scaling objects using Object Details
You can scale selected objects or a whole design
using Object Details. This allows stitches to be
regenerated and the original stitch density
preserved.
Warning If you scale a stitch design by more than
5%, changes to stitch density will affect the design
quality. See also Embroidery design
To scale objects using object details
1 Select the object/s to scale.
2 Double-click the object to open the Object Details
dialog, and select the Dimensions tab.
3 In the Dimensions panel, scale the object as required.
Either:
Enter exact height and width values
Enter the new height and width as a percentage of
the current dimensions.
4 Click OK.
Drag
Scale horizontally
Shift + drag
Scale horizontally in
both directions
formats.
Adjust height and
width values
120