Janome DigitizerPro Instruction Book page 162

Adding lettering to embroidery
designs
EasyDesign lets you add lettering to designs
quickly and easily using the built-in library of
embroidery fonts. Apply formatting to lettering
objects in the same way as a word processor,
including italics.
Try this! The size of your lettering will determine
the type of underlay you need to apply. Apart from
stabilizing, underlay helps give 'loft' or to raise
your lettering off the fabric. Lettering with heights
under 5 mm should not have underlay. Letters 6
mm to 10 mm can have a center-run underlay
applied. Lettering larger than 10 mm is large
enough for edge-run underlay. See also
with underlays.
Creating embroidery lettering
Use Lettering > Lettering to add embroidery
lettering to designs or edit selected lettering.
You can change lettering characteristics before or
after you digitize. You can also modify lettering
objects directly on-screen to achieve various
artistic effects. EasyDesign provides a font range
suitable for many applications.
JANOME Embroidery Software Instruction Book
To create embroidery lettering
1 Click the Lettering icon.
The Object Details > Lettering dialog opens.
Select font
and format
Enter text
Select
justification
Select
orientation
2 Enter the text you want to embroider in the text entry
panel.
To start a new line of lettering, press
Try this! You can insert a color change between two
Stabilizing
letters by keying a caret (^) symbol. Subsequent letters
default to the next color in the palette.
3 Select a font from the Font list.
A sample character of the chosen font appears in the
preview window. For samples of the complete selection
of standard fonts, see
4 Adjust the lettering Size, Width, and Slant settings as
required.
Try this! Consider the font before changing letter size.
Some fonts look best in a smaller size. Others can be
stitched at a larger size. See also
Chapter 21 Creating Embroidery Lettering
Packaged Fonts.
Packaged
160
Enter
.
Fonts.