Janome DigitizerPro Instruction Book page 167

Creating vertical orientations
Vertical orientation does not have a fixed
or pre-determined length – the
extends as long as you keep adding
letters. Line spacing is calculated
horizontally while letter spacing is
calculated vertically. Letters, by default,
are centered along vertical lines. New
lines are placed by default from right to
left to suit Asian languages. Vertical
orientation is effective for embroidering
on sleeves, as a decorative effect, and for
Asian text.
Try this! Vertical lettering best suited to
uppercase for Western languages because
descenders in lowercase letters are not
accommodated in the letter spacing. See
individual letter spacing on-screen
To create a vertical orientation
1 In the Object Details > Lettering dialog, click the
Vertical orientation icon.
Select
vertical
orientation
2 Enter your text in the text entry box.
OK
3 Click .
4 Mark the start point of the baseline on-screen.
Try this! You can adjust orientation settings at any
stage. See Adjusting orientations
Creating circular orientations
Use the Circle CCW or Circle CW orientation to
place letters around a full circle.
baseline
For a circle you need to mark two reference points,
while for an oval you need to mark three. The
position of the second reference point determines
the justification point of the text. The text is
centered around this point.
Adjusting
for details.
To create a circular orientation
1 In the Object Details > Lettering dialog, click the
2 Enter your text in the text entry box.
3 Click
4 Mark the center of the circle on-screen.
5 Mark a point on the circumference to define the radius.
for details.
6 Press
Click to place
center of circle
JANOME Embroidery Software Instruction Book
Chapter 21 Creating Embroidery Lettering
Circle Above
Circle CCW or Circle CW orientation icon.
Select circular orientation
OK
.
Click to place
center of circle
1
Enter
for a perfect circle, or click again to form an
oval.
3
1
As soon as the last point is marked, the letters of your
text are positioned around the circle.
Circle Below
2
Click to set radius
of circle
Click to set radius
of oval
2
Click to set
radius of circle
165