Janome DigitizerPro Instruction Book page 26

Open an existing design: Use this option if you have
an existing design or want to use one of the
packaged designs. See also
EasyDesign.
Digitize an existing image: Use this option if you have
electronic artwork which you want to use as a basis
for a new design. See
details.
Free-hand digitize: Use this option if you want to
create a new design using the available digitizing
tools within JANOME Embroidery Software.
If you select one of the second two options, the
Choose Fabric dialog opens.
3 Choose from a set of pre-defined fabrics.
JANOME Embroidery Software provides a set of
optimized fabric settings
into account the type of fabric you are stitching on. See
Working with fabrics
If you select to free-hand digitize, EasyDesign opens
with a new, blank design (Design1).
Opening designs in
Digitizing with Backdrops
Select a fabric
Recommended backing
and/or topping
so that the software will take
for details.
JANOME Embroidery Software Instruction Book
4 Customize the Design Window by showing or hiding
the grid, changing the grid dimensions, and showing
and hiding toolbars. See
Showing or hiding toolbars
Starting EasyEdit
for
Double-click to start EasyEdit.
Open JANOME Embroidery Software EasyEdit using
the desktop icon or the Windows Start menu.
To start EasyEdit
Double-click the JANOME Embroidery Software
EasyEdit shortcut icon on the Windows desktop.
Alternatively, select Programs > JANOME
DigitizerPro > EasyEdit from the Start menu.
EasyEdit opens with a new, blank
Customize the Design Window by showing or hiding
the grid, changing the grid dimensions, and showing an
d hiding toolbars. See
or hiding toolbars
Opening designs in EasyDesign
Use Standard > Open to open an existing design.
JANOME Embroidery Software EasyDesign opens
JAN files. See Embroidery design formats
details.
Chapter 4 Basic Procedures
Displaying the grid
for details.
design (Design1).
Displaying the grid and
for details.
24
and
Showing
for