Janome DigitizerPro Instruction Book page 65

Outline & Fill Stitches
All embroidery objects in JANOME
Embroidery Software contain a defining
set of settings or 'values'. The values
stored with an object become its
'properties'. All objects have certain
properties in common such as size and
position. There are other, more specific
properties of objects which depend on
the object type. The most important
property of all embroidery objects is the
stitch type.
Stitch properties are defined as you
digitize, but they can be changed at any
stage. When you create an embroidery
object, you can accept the
or apply new ones. Default settings are stored in the design template.
This section explains how to select a stitch type for an object, as well as change
stitch settings to obtain the best results. Fill stitch types described here include
Satin, Weave, and Embossed Fill.
Selecting fill stitches
Different stitch types are suited to different
objects. When you digitize an object, it uses the
current stitch type for the selected digitizing
method. However, you can change an object's
stitch type at any stage. You can also preset the
stitch type by selecting it as 'current' before
digitizing.
To select fill stitches
1 Select and double-click the object/s whose stitch type
you want to change.
The Object Details > Fill Stitch dialog opens.
default settings for the particular digitizing method,
2 Select a fill stitch type:
Chapter 9
63