Janome DigitizerPro Instruction Book page 252

Extension Format
10O Toyota
† JANOME Digitizer MB only
Supported electronic artwork
formats
Artwork can be imported into JANOME Embroidery
Software in both vector and bitmap formats.
Generally speaking, vector images preserve the
picture quality when resized, whereas bitmap
images cause problems of pixilation and image
degradation when enlarged or scaled down.
However, any scaling required should be done
before importing into EasyDesign as the importing
operation automatically transforms vector images
into bitmaps. See Digitizing with Backdrops
details.
Supported vector formats
JANOME Embroidery Software supports the
following vector formats:
Extension Format
EMF Enhanced Metafile
EPS Encapsulated PostScript
WMF Windows Metafile
Supported bitmap formats
JANOME Embroidery Software supports the
following bitmap formats:
Extension Format
BMP Windows Bitmap
JPG JPEG File Interchange
PCX ZSoft
PNG Portable Network Graphics
Supported hoop types
JANOME Embroidery Software supports a variety of
hoop types used with the different machine
models. See also Selecting machine
Read Write
†
The Hoop Type list is automatically filtered
according to the current machine type. Only those
hoops supported by the current machine are
available. See
Note If you attempt to save a design in a hoop
size not supported by the machine, JANOME
Embroidery Software will prompt you to select a
different hoop. If you attempt to send a design to
machine with a hoop not supported by the
for
machine, you will be prompted to select a different
hoop. See also
Read Write
Read Write
models.
JANOME Embroidery Software Instruction Book
Appendix B Supported Files and Hoops
Grids and Hoops
Saving designs for
250
for details.
machine.