Janome DigitizerPro Instruction Book page 125

You can also print out the layout with Cloth Setter
marks to enable them to use the JANOME Cloth
Setter to physically layout the designs on the item
or fabric you wish to embroider. You can also print
the template which can be used to position each of
the hooped portions of the design. See
Designs for details.
Try this! When used in conjunction with the
Combine toolbar, you can place multiple hoops
around a single design. See
for details.
Defining work areas
Use Easy Layout > Display Layout Work Area to
toggle display of the defined work area.
Use Easy Layout > Define Layout Work Area to
access the Easy Layout Work Area dialog.
Use Apply to generate the object/s and stitches of
copies created by Easy Layout operations.
Pressing the Enter key has the same effect.
Before you can create a design layout, you first
need to define a work area according to the
characteristics of the item or fabric you intend to
sew to. Work areas may be defined as rectangular
or circular spaces. EasyDesign allows you to define
a work area of up to 3m x 3m.
To define a work area
1 Click the Define Layout Work Area button to create a
new work area.
Printing
Hooping large designs
JANOME Embroidery Software Instruction Book
Chapter 16 Arranging and Transforming Objects
The Easy Layout Work Area dialog is displayed.
Define rectangular or
circular work area
Define work
area color
2 Select either a rectangular or round work area and
enter the required size.
3 Optionally click the Pick Color button to change the
display color.
The Color dialog where you can select another color or
create a new color of your choice.
4 Click OK to confirm selections.
5 Click the Display Layout Work Area button to display
the layout.
123
Pick or define
color of your
choice