Janome DigitizerPro Instruction Book page 27

Warning You cannot open files created with a
later version of the software to the one you are
running.
To open a design in EasyDesign
1 Click the Open icon.
The Open dialog opens.
2 Select a folder from the Look In list.
3 If the design is not in JAN format, select a file type from
the Files of Type list.
4 Select a design or designs.
To select a range of items, hold down Shift as you
select.
To select multiple items, hold down Ctrl as you
select.
5 Select the Preview checkbox to preview the design
(for supported file formats) together with design data.
This includes stitch and color numbers, design height
and width.
Try this! For more information about a selected file,
right-click in Windows Explorer and select Properties
from the popup menu.
6 Click Open.
Opening designs in EasyEdit
Use Standard > Open to open an existing design.
JANOME Embroidery Software EasyEdit opens JEF
and SEW files. See Embroidery design formats
details.
JANOME Embroidery Software Instruction Book
Warning You cannot open files created with a
later version of the software to the one you are
running.
To open a design in EasyEdit
1 Click the Open icon.
The Open dialog opens.
2 Select a folder from the Look In list.
3 If the design is not in JEF format, select a file type from
the Files of Type list.
4 Select a design or designs.
To select a range of items, hold down Shift as you
select.
To select multiple items, hold down Ctrl as you
select.
5 Click Open.
Switching between EasyDesign and
EasyEdit
JANOME Embroidery Software allows you to
quickly switch between the EasyDesign window
and the Easy Edit window with a single click.
EasyDesign-to-EasyEdit is accessed by clicking the
Switch to EasyEdit icon located on the
Standard toolbar in EasyDesign. The reverse is
available on the Standard toolbar in EasyEdit.
When switching, you are prompted to save any
changes you have made.
for
Chapter 4 Basic Procedures
25