Janome DigitizerPro Instruction Book page 71

Contour instead. You cannot use Spiral Contour
with Circle objects.
To create a contour fill
1 Select a contour fill digitizing method from the Digitize
toolbar.
2 Create a contour fill object. See
shapes with fixed stitch angles
3 Double-click to access
4 Adjust stitch spacing and length as required.
5 Select a contour type – Standard or Spiral.
Standard Contour
OK
6 Click to apply.
Creating radial fills
Use Digitize > Parallel Radial Fill to digitize
closed shapes with fill stitches.
Use Digitize > Parallel Radial Fill Rectangle to
digitize rectangles with fill stitches.
Use Digitize > Parallel Radial Fill Circle to digitize
circles with fill stitches.
The Radial Fill stitching effect is achieved by
radiating a stitch pattern from a common central
point.
Digitizing complex
for details.
object details.
Adjust stitch spacing
and length
Select contour fill type
Spiral Contour
JANOME Embroidery Software Instruction Book
Chapter 9 Outline & Fill Stitches
To create a radial fill
1 Select a radial fill digitizing method from the Digitize
toolbar.
2 Create a radial fill object. See
shapes with fixed stitch angles
3 Double-click to access
4 Select a pattern from the dropdown list as required.
5 Adjust the pattern size and spacing settings in both
vertical and horizontal directions, as required.
OK
6 Click to apply.
Creating Florentine effects
Use Edit > Florentine Effect to create
user-defined curved stitching.
Florentine Effect can be applied to Weave Fill
objects to create a flowing stitch effect along a
Digitizing complex
for details.
object details.
69