Janome DigitizerPro Instruction Book page 142

Managing fabrics
In addition to the pre-defined
can create your own custom fabric settings to suit
particular needs. You can also modify, rename or
delete any custom fabrics you create.
To manage fabrics
1 Select Setup > Manage Fabrics.
The Manage Fabrics dialog opens.
Note If you already have custom fabrics defined, you
have the option of editing, renaming, or deleting.
2 To create a new fabric type, click New.
The New Fabric dialog opens.
Enter fabric
name
3 Change the Based on Fabric setting as required.
4 Enter a descriptive name for the fabric type in the New
Fabric Name field and click OK.
The Fabric Settings dialog opens. This dialog allows
you to set the fabric values for four object groups –
Weave/Embossed Fill, Wide Satin, Narrow Satin, and
Lettering – as well as enter details of any
recommended stabilizers.
fabric settings, you
Create new
fabric type
JANOME Embroidery Software Instruction Book
Chapter 18 Object Details, Fabrics and Templates
5 Adjust the Stitch Length and Stitch Spacing settings
for your Weave / Embossed Fill objects as required:
Weave Fill stitch consists of rows of run stitches and
is suitable for filling large, irregular shapes. See
Creating weave fills
Embossed Fill is a decorative stitch type. Use it to fill
wide and large areas with unique artistic effects while
keeping the appearance of a solid field of stitching.
See Creating embossed fills
6 Set a suitable underlay type for Weave and Embossed
Fill objects. See Stabilizing with underlays
7 Set a stretchiness allowance for Weave and Embossed
Fill objects. See Compensating for fabric stretch
details.
Fabric: Denim
Stretchiness: Medium
8 Click the tab to access the Wide Satin settings.
These settings will become the
objects. See Creating satin fills
for details.
for details.
for details.
Fabric: Denim
Stretchiness: Low
Fabric: Denim
Stretchiness: High
defaults for larger Satin
for details.
140
for