Janome DigitizerPro Instruction Book page 204

Note For detailed procedures relating to your
particular machine, see
Writing multiple designs to ATA PC card
As with single designs, the procedure for writing
multiple designs to ATA PC card varies slightly with
the machine model. Select the machine model you
intend to write to and select External Media >
Write Designs, Read and Erase. The particular
dialog which opens will depend on the current
machine model.
Select source
folder on your PC
Select files to
write
Use buttons to
navigate folders of
display file list
In addition to writing design files to machine, you
can generally receive or delete files from the
destination folder.
Click to read
Note For detailed procedures relating to your
particular machine, see
Outputting to Machine.
Click to erase
Outputting to Machine.
JANOME Embroidery Software Instruction Book
Chapter 25 Reading and Writing Design Files
202