Janome DigitizerPro Instruction Book page 29

Note JANOME Embroidery Software toolbars are
dockable. To move a toolbar to a more convenient
location, click and drag it. To dock it in its normal
position, double-click the toolbar title.
Click edge of
toolbar then
drag it
Using popup menus
Right-clicking a selected object opens a popup
menu containing frequently used commands.
To use popup menus
1 Right-click a selected object.
The popup menu opens.
2 Select a command from the menu.
Undoing and redoing commands
Use Standard > Undo to undo a command.
Use Standard > Redo to reapply a command
which has been 'undone'.
You can undo the effects of most commands. If you
change your mind, you can redo them again.
JANOME Embroidery Software remembers the last
few commands you used.
Right-click to
invoke popup
menu
JANOME Embroidery Software Instruction Book
To undo and redo commands
To undo a command, click the Undo icon.
When JANOME Embroidery Software cannot
remember more commands, Undo is dimmed.
Click Redo to re-apply an 'undone' command.
Selecting machine models
JANOME Embroidery Software supports various
sets of machine model. Some Janome machines
can be connected by cable directly to your PC via
the USB port. Older-style machines do not support
direct connection but they do read ATA PC cards
and/or USB memory sticks. See also
writing designs.
Note JANOME Embroidery Software records the
embroidery area of custom hoops to JEF file which
can then be read by multi-needle machines to
determine the stitching area. On the other hand,
the stitching area of single-needle machines is
determined by the selected hoop type. If the file
contains a 'non-standard' (custom) hoop code, the
hoop size is automatically based on the design size
which is used to limit the stitching area. See
Defining custom hoops
To select a machine model
1 Click the Machine Model dropdown list on Standard
toolbar.
Select machine
model set
Alternatively, select Machine > Select Machine
Model.
The Select Machine Model dialog opens.
Chapter 4 Basic Procedures
Sending and
for details.
27