Janome DigitizerPro Instruction Book page 24

22
Part I
Basics
Designs created in EasyDesign are composed of 'embroidery objects'. They
are called 'objects' because they are discrete entities which can be
manipulated independently of each other. Each object has certain defining
properties or 'details' such as color, size, position, and so on. The most
important property of an embroidery object is its stitch type.
Basic procedures
This section describes how to start JANOME Embroidery Software
EasyDesign and JANOME Embroidery Software EasyEdit, how to open
designs, start new ones and use the basic commands. It also explains how
to turn on and off the grid and hoop and measure distances on-screen. You
will also find out how to save designs. See Basic Procedures for details.
Viewing designs
This section explains the design viewing modes available in JANOME
Embroidery Software as well as the various design viewing settings. It
describes how to view the stitching sequence in both EasyDesign and
EasyEdit, and how to view the stitching sequence in slow motion. Access to
design information is described, as well as viewing and hiding images. See
Viewing Designs for details.
Selecting objects
This section describes how to select objects using the selection tools and
keyboard. It shows how to select while traveling through the design and how
to select objects of a specific color. You can also select individual stitches in
EasyEdit. See Selecting Objects for details.
Grids and hoops
This section describes how to set grid spacing in JANOME Embroidery
Software. It also covers changing hoops and defining your own custom
hoops. It explains splitting designs on an MA Hoop when sending to machine
as well as changing hoop backgrounds. See Grids and Hoops for details.